에어팟 도우미 개인정보처리방침
최종 업데이트: 2026년 11월 14일
이 방침은 DGY Creative Lab이 제공하는 Android 앱 에어팟 도우미 / AirPods Companion의 무료 버전(com.dgy.and_airpod)과 Pro 버전(com.dgy.and_airpod.pro)에 적용됩니다. 이용할 수 있는 기능과 정보 처리는 설치한 버전에 따라 다릅니다.
1. Bluetooth와 기기 내 정보
앱은 사용자가 허용한 Bluetooth 연결 및 주변 기기 검색 권한을 사용하여 연결된 기기의 이름, Bluetooth 주소와 연결 상태, 모델·펌웨어 및 가능한 경우 배터리와 청취 모드 등의 정보를 읽고, 사용자가 요청한 호환 설정을 기기에 전달합니다. 주변 검색 기능은 가까운 Bluetooth 신호와 신호 세기, 해당 신호에서 읽을 수 있는 기기 모델 및 배터리 추정치를 처리합니다. 주변 검색 결과는 연결된 기기의 신원이 확인된 결과라고 보장하지 않습니다. 알림 권한은 연결 및 배터리 알림에 사용됩니다. 알림 또는 위젯을 통한 모니터링을 켜면 앱 화면 밖에서도 기기 연결을 감시할 수 있습니다.
앱은 선택과 모니터링 설정, 권한 요청 이력, 개인정보 선택 및 케이스 배터리 이력을 앱 전용 저장소에 보관할 수 있습니다. 케이스 이력에는 기기 Bluetooth 주소의 SHA-256 해시를 키로 한 배터리 수치·충전 상태·시각·출처가 포함됩니다. 해시는 익명성을 보장하지 않습니다. 주변 검색 결과는 일시적으로 메모리에서 관리됩니다. 이 Bluetooth 정보는 앱의 기기 기능에 사용되며, 앱이 광고 요청이나 분석 이벤트의 값으로 의도적으로 보내도록 작성되어 있지 않습니다. 아래 Google SDK가 별도로 처리하는 기기·네트워크 정보와는 구분됩니다.
2. 무료 버전의 선택적 분석과 오류 진단
무료 출시 버전은 Google Firebase Analytics와 Crashlytics를 사용합니다. 앱의 추가 설정 > 개인정보 및 분석 설정에서 앱 사용 분석과 오류 진단 공유를 각각 선택할 수 있습니다. 새 설치에서 두 선택은 기본적으로 꺼져 있으며 기존에 저장한 선택은 이후 실행에서 복원될 수 있습니다. 연령 선택은 이 Firebase 설정과 별개입니다. 선택 설정은 광고 개인정보 선택과 별개입니다. Pro 버전에는 이 Firebase 구성요소가 포함되지 않습니다.
분석을 허용하면 앱이 고정된 홈 화면 이벤트를 기록하고, Analytics가 앱 인스턴스 식별자, 앱·기기 정보와 사용 관련 정보를 처리할 수 있습니다. IP 주소에서 대략적인 지역이 추정될 수 있습니다. Firebase Analytics의 광고 ID 수집은 비활성화하도록 설정되어 있으며, Firebase의 광고 저장소·광고 사용자 데이터·광고 개인 최적화 동의는 거부로 설정됩니다. 이 설정만으로 아래 AdMob의 처리가 모두 차단되는 것은 아닙니다.
Crashlytics는 오류 스택, 앱·운영체제·기기 정보, 설치 및 세션 식별자와 진단 정보를 처리할 수 있습니다. 앱은 자동 오류 보고를 끄도록 설정하고 실행 시 다시 끄도록 요청하며 오류 보고서가 기기에 저장될 수 있습니다. 진단 공유를 켜고 저장된 동의 이력과 보고서 상태가 조건을 충족하면 이후 실행에서 전송을 요청할 수 있습니다. 공유를 끄면 미전송 보고서 삭제를 요청합니다. SDK는 전송 또는 삭제의 완료를 앱에 보장하지 않으며 이미 요청한 전송이 철회 후 완료될 수 있습니다.
3. 무료 버전의 광고 및 개인정보 선택
광고 기능 추가 전 무료 1.3.2(versionCode 7) 소스에는 광고 표시 기능이 없었습니다. Google AdMob 광고와 Google User Messaging Platform(UMP)이 포함된 무료 1.3.3 이후 버전이 배포되어 설치된 경우 이 단락의 광고 및 연령 선택 처리가 적용됩니다. Pro 버전에는 광고 SDK와 이 연령 선택 기능이 포함되지 않습니다.
광고 기능이 있는 무료 버전은 13세 미만, 13–15세, 16–17세, 18세 이상 또는 응답하지 않음 중 연령대를 선택하도록 요청합니다. 앱은 생년월일이나 선택한 미성년 세부 연령대 대신 성인, 제한 대상, 미선택의 넓은 분류만 기기에 저장하며, 광고 처리 대상을 구분하는 데 사용합니다. 추가 설정 > 연령대 선택에서 선택을 바꿀 수 있습니다. 광고 관리 로직은 18세 이상을 선택한 경우에만 UMP 동의 상태를 갱신하고 광고 요청 가능 여부를 확인한 후 광고 SDK 초기화와 광고 요청을 진행하도록 작성되어 있습니다. 18세 미만이나 미선택이면 이 광고 요청 절차를 시작하지 않도록 합니다. 이 선택은 Firebase의 기존 분석·진단 선택을 변경하지 않으며, 다른 SDK 또는 시스템 구성요소의 모든 처리가 없다는 보장은 아닙니다.
Google Mobile Ads SDK는 광고 제공·측정, 분석 및 부정행위 방지를 위해 IP 주소(대략적인 지역 추정에 사용될 수 있음), 앱 실행·광고 상호작용, 앱 및 SDK 성능·진단 정보, 앱 세트 ID와 해당하는 경우 기기에 로그인한 계정과 관련된 기타 식별자를 처리하고 Google 및 광고 제공 관련 당사자와 공유할 수 있습니다. 이 앱은 Android 광고 ID 및 광고 서비스의 광고 ID·기여도·Topics 접근 권한을 제거하도록 구성되어 있습니다. 권한 제거만으로 다른 식별자 또는 SDK의 모든 정보 처리가 없다고 보장하지 않습니다. 실제 처리는 기기·지역·개인정보 선택 및 서비스 설정에 따라 달라집니다.
UMP는 적용되는 지역 및 설정에 따라 개인정보 메시지와 광고 개인정보 선택을 제공할 수 있습니다. 해당되는 경우 추가 설정 > 광고 개인정보 선택에서 선택을 다시 확인하거나 변경할 수 있습니다. 메시지와 사용 가능한 선택은 지역과 설정에 따라 다를 수 있습니다. 분석·오류 진단 설정은 이 광고 선택과 별도로 관리됩니다.
자세한 내용은 Google 개인정보처리방침, Google 서비스를 사용하는 앱의 정보 처리, Google Mobile Ads SDK 데이터 공개 안내를 확인해 주세요.
4. 보관, 보호 및 삭제
앱 전용 저장소의 설정과 이력은 변경하거나 앱 데이터를 삭제할 때까지 남을 수 있습니다. Android 설정에서 이 앱의 저장공간을 지우거나 앱을 삭제하면 기기에 저장된 앱 데이터가 삭제됩니다. 이는 이미 Google에 전달된 데이터나 이미 요청된 전송까지 삭제하는 것은 아닙니다. 앱은 Android 백업을 허용하지 않도록 구성되어 있습니다. Android의 앱 전용 저장소 접근 제한을 사용하지만 별도의 저장 데이터 암호화를 보장하지 않습니다.
Google Mobile Ads SDK는 Google의 안내에 따라 전송 중 TLS를 사용합니다. Firebase는 HTTPS를 사용하여 전송 중 데이터를 암호화한다고 안내합니다. Firebase Crashlytics는 오류 스택과 관련 식별자를 90일 동안 보관한 후 운영 및 백업 시스템에서 삭제를 시작한다고 안내합니다. 다른 Firebase 및 광고 데이터의 보관·삭제 기간은 서비스와 설정에 따릅니다. 자세한 내용은 Firebase 개인정보 및 보안 안내와 Google 개인정보처리방침을 확인해 주세요. Google은 여러 국가의 시설에서 정보를 처리할 수 있습니다.
분석·오류 진단 선택을 끄려면 앱의 개인정보 및 분석 설정을 이용하세요. Bluetooth와 알림 권한은 Android 앱 설정에서 변경할 수 있습니다. 정보 열람·정정·삭제 등의 요청은 아래 연락처로 문의할 수 있습니다. 이미 제3자가 처리한 정보는 해당 제공자의 도구나 문의 절차가 필요할 수 있습니다.
5. 문의와 변경
개발자: DGY Creative Lab. 개인정보 관련 문의: carpediem.jun7@gmail.com. 문의에 포함된 내용과 회신 주소는 문의에 응답하기 위해 사용됩니다. 비밀번호나 불필요한 민감정보는 보내지 마세요.
이 방침은 기능, 제공자 또는 법령이 바뀌면 수정될 수 있으며 변경 내용은 이 페이지에 게시합니다.
AirPods Companion Privacy Policy
Updated November 14, 2026. This policy applies to the Android app AirPods Companion by DGY Creative Lab: the free edition (com.dgy.and_airpod) and the Pro edition (com.dgy.and_airpod.pro). Practices depend on the version installed.
1. Bluetooth and on-device information
With Bluetooth connection and nearby-device permissions, the app reads connected-device names, Bluetooth addresses and connection status, model and firmware information, and where available battery and listening-mode information. It sends compatible settings to the device when you request them. Nearby scanning processes nearby Bluetooth signals, signal strength, and any model and approximate battery information the signals contain. A nearby result is not necessarily the connected device. Notification permission supports connection and battery alerts. If you enable monitoring through notifications or the widget, the app may monitor the connection while its screen is not open.
Settings, monitoring and permission history, privacy choices, and case battery history may be kept in app-private storage. Case history uses a SHA-256 hash of a Bluetooth address as a key and stores battery level, charging state, time, and source. Hashing does not guarantee anonymity. Nearby scan results are kept temporarily in memory. The app uses this Bluetooth information for device features and is not programmed to intentionally include it as a value in ad requests or analytics events. Google SDKs may separately process device and network information as described below.
2. Optional analytics and crash diagnostics in the free edition
The free release uses Google Firebase Analytics and Crashlytics. Analytics and crash diagnostic sharing are separate choices under More settings > Privacy and analytics. Both choices are initially off on a fresh installation; previously saved choices may be restored on later launches. The age choice does not change these Firebase settings. The Pro edition does not include these Firebase components.
If analytics is enabled, the app records a fixed home screen event, and Analytics may process an app instance identifier, app and device information, and usage information. An approximate region may be inferred from the IP address. Firebase Analytics is configured to disable advertising ID collection and Firebase ad storage, ad user data, and ad personalization consent are set to denied. This setting alone does not disable all processing by AdMob described below.
Crashlytics may process crash stacks, app, operating-system and device information, installation and session identifiers, and diagnostics. The app is configured to disable automatic crash reporting and requests that it be disabled again on startup; reports may be stored on the device. If diagnostic sharing is enabled and stored consent history and report status meet the app's conditions, it may request transmission on a later launch. Turning sharing off requests deletion of unsent reports. The SDK does not guarantee delivery or deletion to the app, and a transfer already requested may finish after withdrawal.
3. Ads and privacy choices in the free edition
The pre-advertising source for free version 1.3.2 (versionCode 7) did not enable ads. The advertising and age-choice practices in this section apply if free version 1.3.3 or later, including Google AdMob and the Google User Messaging Platform (UMP), is distributed and installed. The Pro edition does not include the advertising SDK or this age-choice feature.
The ad-enabled free version asks users to select under 13, 13–15, 16–17, 18 or older, or prefer not to say. Instead of a date of birth or the selected minor age band, the app stores only a broad adult, restricted, or unspecified category on the device to decide whether to use the advertising flow. You can change the choice under More settings > Age range. The advertising logic is designed to update UMP consent and initialize and request ads only after an 18-or-older choice and an affirmative UMP eligibility check. It is designed not to start this ad-request flow for users who select under 18 or do not specify an age. The choice does not change previously saved Firebase analytics or diagnostics choices; it does not guarantee that other SDKs or system components process no information.
The Google Mobile Ads SDK may process and share with Google and parties involved in ad delivery an IP address (which may indicate an approximate region), app launches and ad interactions, app and SDK performance and diagnostic information, app set ID, and, where applicable, other identifiers related to accounts signed in on the device. Purposes include advertising and measurement, analytics, and fraud prevention. The app is configured to remove Android advertising ID and ad-service advertising ID, attribution, and Topics permissions. Removing these permissions does not guarantee that other identifiers or all SDK data processing are absent. Processing depends on device settings, region, privacy choices, and service configuration.
Depending on region and configuration, UMP may present a privacy message and advertising privacy choices. When applicable, you can review or change available choices under More settings > Ad privacy choices. Messages and available choices vary by region and configuration. Analytics and crash diagnostic choices are managed separately.
See Google's Privacy Policy, How Google uses information from apps that use its services, and the Google Mobile Ads SDK data disclosure.
4. Retention, security and deletion
Settings and history in app-private storage may remain until changed or app data is deleted. Clearing this app's storage in Android settings or uninstalling it removes its locally stored app data. This does not delete data already sent to Google or cancel transfers already requested. The app is configured not to allow Android backup. Android restricts access to app-private storage, but the app does not promise separate encryption of stored data.
Google states that the Google Mobile Ads SDK uses TLS in transit and Firebase encrypts data in transit using HTTPS. Google states that Firebase Crashlytics retains crash stacks and associated identifiers for 90 days before starting removal from live and backup systems. Retention and deletion of other Firebase and advertising data depend on the service and its configuration. See Firebase Privacy and Security and Google's privacy policy. Google may process information at facilities in multiple countries.
Use the app's Privacy and analytics settings to turn off analytics or diagnostic sharing. You can change Bluetooth and notification permissions in Android settings. Contact us below to request access, correction, or deletion. Data already processed by a third party may require that provider's tools or request process.
5. Contact and changes
Developer: DGY Creative Lab. Privacy inquiries: carpediem.jun7@gmail.com. We use the contents of an inquiry and the return address to respond. Please do not send passwords or unnecessary sensitive information.
We may update this policy when features, providers, or legal requirements change. Updates will be posted on this page.